Bell System bell free Bedienungsanleitung PDF herunterladen (Seite 11)

Bellﬁ res

English

Instructions for use and installation instructions

Figure 1: Hand-held transmitter

Set the display

• Connect the batteries. By simultaneously pressing OFF and (small ﬂ ame), can be

switched from °F (and 12 hour clock) to °C (and 24 hour clock), or vice versa.

• The display will automatically return to mode after some time, but you may

immediately return to mode by pressing the OFF button.

Set the current time

• By simultaneously pressing (large ﬂ ame) and

(small ﬂ ame), the display ﬂ ashes.

You are in SET mode.

• While the screen is ﬂ ashing, you can adjust the time.

• Press (large ﬂ ame) to set the hour and (small ﬂ ame) to set the minute.

• Wait or press OFF to return to mode.

Important: Setting up signal code before using the appliance for the ﬁ rst time.

Before the appliance can be used, the receiver must ﬁ rst learn the hand-held

transmitter’s signal code.

• Press the “RESET” button on the receiver, and keep this pressed until 2 audio signals

are heard. See ﬁ gure 2.

Release the “RESET” button after the second (somewhat longer) audio signal.

• Press, within 20 seconds, the (small ﬂ ame) button on the hand-held transmitter,

until a somewhat longer signal is heard. The signal code has now been set up on

the receiver.

You only need to set up the signal code once. It is not necessary when changing the

batteries of the hand-held transmitter or receiver.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

Keine Kommentare

Bell System bell free Bedienungsanleitung Seite 11