Bell System bell free Spezifikationen PDF herunterladen (Seite 19)

BF Apartment Station Digital Entry System

PD–166 Issue 1 Installation and Operating Manual Page 19 of 48

BFD-DIG Door Controller Settings

The BFD-DIG is programmed from the panel for all settings.

Security

It is strongly recommended that the Panel Security Code (PSEC) be changed from its

factory setting to prevent unauthorised access. Record the new number carefully as it

cannot be easily changed if lost. It is also recommended that the Phone Programming

Code (PPRG), Coded Access Code (ACOD) and Trades Access Code (TCOD) are all

changed from default even if not used.

To access panel programming without the code requires physical access to the controller

PCB, borrow a jumper from say video gain (remember the setting) and place it on the 5 pin

programming header between pins 1 & 2. Now pressing the test button will enter panel

programming for 30S when the panel security code can be read or set. When the

programming is finished replace the jumper back to its original location.

Panel Programming

To use Panel Programming Mode: -

 First type the Panel Security Code (initially [3434]) followed by the call button.

 The display will show the first programmable parameter (ACOD), and then alternating

at 1 second intervals will be the value and the parameter name.

 Press the door button to step down through the programmable parameters.

 Press the reception button to step up through the programmable parameters.

 The list rolls over bottom to top and vice versa.

 To change a numeric parameter simply type a new 1-4 digit value and then press call.

 To change other values simply press call to choose the next value.

 To exit Panel Program Mode press cancel.

 If no button is pressed for 30 seconds then programming mode will auto-cancel.

Code

Default

Access

Description

ACOD

1234

Coded access code – must be 4 digits

TCOD

6789

Trade access code – must be 4 digits

LTIM

0003



Lock Time: 1-99 seconds

LOCK

Secr

Lock Type: Secr (fail secure), Safe (fail safe)

CAM2

Camera 2: No (absent), Yes (present)

TRAD

0005

Trade Function: 0-9 – see table

DMON

Cwo

Door Monitor Polarity: Cwo, Owo

RECP

9898

Reception / Porter phone number

PSEC

3434

Panel security code

PPRG

1212

Phone programming security code

RING

0015

Ring Time – see table

TALK

0015



Talk Time – see table

TONE

Both

Ring and Lock Buzz-Tone enable, 4 settings

CANC

Yes

Allow Cancel button to terminate Call

BCAL

Bellcall BCP1 compatibility mode

12A?

Allows user entry of 12A to call BSC4 output 13

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Bell System bell free Spezifikationen Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Türsprechanlagen Bell System bell free