Bell System bell free Spezifikationen PDF herunterladen (Seite 7)

BF Apartment Station Digital Entry System

PD–166 Issue 1 Installation and Operating Manual Page 7 of 48

The call may be terminated by touching the pickup symbol again or more usually by

touching the lock symbol first to allow the visitor access through the entrance; the speech

and picture will persist for a further 3 seconds while the door is being released.

Silent viewing

When the apartment station is ringing the resident can touch the view symbol to answer

the call instead of the pickup symbol; this will stop the apartment station ringing and

enable them to view the visitor for up to 60 seconds or until the lock symbol is touched to

release the door. Silent viewing can be „normalised‟ at any time by touching the pickup

symbol and conversing with the visitor as described above.

Apartment Station Controls

The diagram in the introduction shows the apartment station and its controls. The controls

are adjusted by touching the end of the slider and sliding the finger up and down. The

default setting is ringer volume halfway and contrast slider fully down.

Auto Display

When „Auto Display‟ mode is selected the picture will come on while the apartment station

is ringing, otherwise the picture will only come on when the call is answered. Auto Display

mode is usually pre-selected at installation and generally only one apartment station per

flat should be set in this mode (see „Extension Apartment Stations‟ below).

Ringer Mute

The resident can mute the ringing sound in the apartment station when they do not wish to

be disturbed. Ringer mute is activated by touching the mute symbol on the apartment

station, which then illuminates in red as a reminder. Touching the mute symbol a second

time will disengage the mute function. Ringer Mute only stops the audible ring, but the

blue ring lamp will still flash and all other functions work normally. Ringer mute will

continue for the pre-set time even if a call is answered.

During installation it is possible to set a time limit for the mute function in various values

from 2 minutes up to 10 hours or indefinitely. When this time period has elapsed the mute

function will automatically disengage. Default timeout is never (See „mute timer‟, page 25).

Door Status Indication

The green lock lamp on the apartment station will illuminate to warn the resident that a

door has been left open following a call. This feature requires a door monitor contact to be

fitted.

Call Privacy

Once a call has been made from an entrance panel only the apartment station(s) which is /

are ringing may answer the call. Once the call is answered another apartment station will

not activate (including extensions of the active apartment station).

User Activation (CCTV Mode)

User activation is a feature of the bellfree 1 way system and is not available on digital

systems. User activation is generally not recommended on larger systems as the

conflicting demands of residents and callers can result in confusion and erroneous fault

reports.

1 2 3 4 5 6 7 8 9 10 11 12 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Bell System bell free Spezifikationen Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Türsprechanlagen Bell System bell free